Application temp. Hardn. at 20C
Main application
Flange seals, gaskets and other static seals
-55 to +210C Shore A 85 +/-5 For dynamic applications not recommended
Flange seals, gaskets and other static seals
-55 to +180C Shore A 85 +/- 3 For dynamic applications not recommended
U-rings, wiper rings and other seal elements
-15 to +180C Shore A 85+/- 5 Sour oil and gas, amines, steam/hot water
high electrical insulation properties
-60 to +100C
-
Back-up and guide rings, machined parts
-30 to +105C
-
Back-up and guide rings, machined parts
Composite seals with elastomer preaload elements
-200 to +260C Shore D 55 - 64 Spring loaded seals, Back-up and Guide elements
Glass fibre / MoS
2
reinforced
Composite seals with elastomer preload elements, spring loaded seals
-200 to +260C Shore D 51 - 60 Back-up and guide rings, low friction
for food industry, excellent chemical restistance
Composite seals with elastomer preload elements, spring loaded seals
-200 to +260C Shore D 62 - 67 Back-up and guide rings, low friction,
Composite seals with elastomer preload elements, spring loaded seals
-200 to +260C Shore D 62 - 67 Back-up and guide rings, low friction
Composite seals with elastomer preload elements, spring loaded seals
-200 to +260C Shore D 65 - 70 Back-up and guide rings, low friction
Composite seals with elastomer preload elements, spring loaded seals
-200 to +260C Shore D 62 - 67 Back-up and guide rings, low friction
PTFE-40% Bronze
brown
T110-BR40
PTFE-40% Bronze
blue
T115-BR40
PTFE-P FDA
white
T101-W
Silicone FDA
blue
S103-BL85
POM FDA
white
P101-WE
PA FDA
natural
A112-WC
AFLAS
black
AF101-B85
PTFE-60% Bronze
brown
T120-BR60
PTFE-25% Carbon
grey
T125-C25
Description
PTFE-F
grey
T105-G
The indicated minimum temperatures are considered as general guidelines. The proper function at low temperature is depending on the type of seal, the
operating conditions and the adjacent metal parts. The indicated maximum temperatures can be exceeded, however this may reduce the service life of
seal.
Silicone FDA
red
S102-R85
Further more we supply parts from various PTFE Compounds,
as well as PEEK, various Polyamide and -imides, PETP, etc..
Please take further information from our material data sheets and/or ask
our application engineers.
Material specifications
Seal-Direct.com
38 Moo 1, Thaveewattana, Thaveewattana, 10170 Bangkok
Phone: 02 8063035, Fax: 02 8063036, michael@ms-trading.com